InnoFuels: Analysis of the location-optimized configuration of the value chain for the production of synthetic kerosene

The European ReFuelEU Aviation Regulation requires the aviation sector to blend non-fossil aviation fuels into its fuel mix from 2030 onwards. According to the regulation, 6% of the fuel supplied must consist of Sustainable Aviation Fuels (SAF), of which 1.2% must be synthetic aviation fuel (e-kerosene).

Germany's national legislation under the Federal Immission Control Act (BImSchG) is even more stringent, requiring a 0.5% blending share of synthetic aviation fuel as early as 2026. These blending requirements will increase progressively in the following years.

Achieving these targets will require a substantial scale-up of synthetic aviation fuel production. The purpose of this study is to examine how the costs of synthetic aviation fuel production can be reduced through the optimization of value chains both within Germany and internationally.

The study shall consider the following stages of the value chain:

  1. Generation of electricity from renewable primary energy sources
  2. Feedstocks and resources for hydrogen production
  3. Electrolysis
  4. Carbon capture
  5. Refining processes, further upgrading, and the utilization of by-products and derivatives

The study shall take into account the European regulatory framework governing the production of synthetic aviation fuels.

Previous studies available as input:

  1. Study on hydrogen production in different regions
  2. Study on financing mechanisms using Contracts for Difference (CfDs)
  3. Study on water availability and competing uses for hydrogen production
  4. Site analysis of CO₂ capture options in Germany

More information about the project

Status of project

Project is ongoing

Project manager

Project staff

Commissioned by

Hochschule RheinMain